EcoTouch Exterior Walls

This is Hybrid Poly-Acrylic Coating. It is Ceramic loaded and Titanuim filled water base coating with the added strength of Acrylics. Excellent adhesion on all types of surfaces, like concrete, wood , nonferrous metals, plastics and this has got properties of Fungal Resistance and Algal Resistance.

The most cost effective Acrylic coating for your interior and exterior application with 100 % quality. It is equivalent to the best products of Berger Paints, Asian Paints and other prime exterior grade coating. Interior grade coating is also available, which is equivalent to Velvet Touch of ICI.

Check the wall surface and smooth the coarse surface.
Coat the wall with Cement Primer.
Mix one part of Whiteknight with 0.5 part of water and use it on wall already coated.
Give two coats for better finishing.
If the finishing coat is not up to your satisfaction due coarser sand surface, give a third coat.
Excellent properties in two coats.
Material is tintable and you can do the tinting with Pthalocynic base pigment concentrates.
This avoids colour fading.

First & subsequent coats should be given by mixing one part of the coating with 0.5 part of water
The mixing ratio is 1:0.5.

If over thinning of material is done, then it will not give proper results. If instructions are properly followed, then this coating may prove to be the most economical and performance oriented.

This coating is not a Fire hazard, but, precaution should be taken by wearing protective clothing, like gloves and goggles to protect the eyes

First coat should be given by mixing one part of the coating with half a part of water, i.e. mixing ratio 1:0.5. Second and subsequent coat should be giving by mixing one part of the coating with half a part of water, i.e. mixing ratio 1:0.5.